Plant designation ALK-TRP-01
We run injection moulding, blow moulding and extrusion under one roof in Tripoli, converting virgin and recycled resin into containers, pipe and film for contractors, packers and wholesalers across Libya and the wider region.
Capability
Each process runs against the same inspection plan, so a blow-moulded jerry can and an extruded pipe leave the plant to the same documented tolerance band.
PROC / INJ
Clamping force from 90 to 650 tonnes across the bank. Suited to crates, closures, fittings and thick-wall housings where dimensional repeatability matters more than cycle speed.
PROC / BLW
Extrusion blow moulding for hollow containers from 250 ml to 30 L, including handled jerry cans and multi-layer bottles for chemical and food-contact duty.
PROC / EXT
Single and twin-screw lines for pressure pipe, conduit, agricultural tubing and blown film, with in-line gauging on wall thickness and outside diameter.
Production lifecycle
Four controlled stages. Material carries its lot number from goods-in through to the packing list, so any delivered unit can be traced back to the resin batch it came from.
Resin arrives in 25 kg sacks or big bags, is sampled against the supplier certificate, dried where the grade requires it, and released to a lot number.
The released lot is dosed with masterbatch and any approved regrind, then converted on the line assigned to that product's tooling.
First-off approval, then scheduled in-process checks on weight, wall thickness, dimensions and — for containers — leak and drop testing.
Goods are nested or palletised to a fixed pattern, shrink-wrapped, labelled, and loaded to a pre-calculated container plan.
Material catalogue
Indicative families below. Full grade sheets, drawings and sample units are issued against a written enquiry.
ALK-HD-BM-6070
The workhorse for containers and pressure pipe. Stiff, chemically resistant, and tolerant of rough handling in transit and on site.
ALK-LD-FL-2420
Soft, clear and forgiving on the seal. Used where the film has to stretch and stay intact rather than hold a shape.
ALK-PP-IM-1100
Higher service temperature than PE and a living hinge that survives repeated flexing. The default for closures and stacking crates.
Export readiness
We quote the load plan with the price. You see how many units fit the container, what they weigh, and which incoterm the figure is built on — before you commit.
RFQ
Give us the grade, wall thickness, annual volume and destination port. You will get a costed load plan and a lead time, not a brochure.